Building A Double Wooden Fence Gate

This will keep the gate square and prevent sagging.

Building a double wooden fence gate.

Depending on the size you can prevent someone from seeing or accessing your yard with solid wood panel. When you decide to build a wooden gate you ll need to keep a few things in mind the first is what your intended purpose is. Smaller to allow for opening clearances. The gate was made by first creating an external frame of 2x4s that were screwed together with exterior screws installed through pre drilled and countersunk holes.

Check the width at the top middle and bottom. Narrower both gates together than the opening or a single gate about 3 4 in. Use the smallest of the three dimensions. Measure the distance between the two posts for the double gate using a tape measure.

You may want a purely decorative gate perhaps to act as an arbor framing your walkway or a more secure gate that provides access to the yard through a fence. Cut and install the planks. Once you ve designed the frame and built it all you need to do now is attach flat planks evenly over the front of the frame to finish your basic wooden gate. I ve been meaning to rebuild one of my wooden fence gates that is over 12 years old.

This fence gate opens into the yard with. See how i built a 12 foot wooden gate that won t sag. Measure planks from the top to the bottom of the frame and cut them accordingly. Subtract 3 inches from the width of the gate post and divided that by two for the width of each gate.

Referencing a sketched diagram of your fence gate to be cut lumber planks for the door size frame and arches and deckboards with their already smoothed and rounded edges for the gate s wood. Diagonal cross braces like this should always angle downward to the lower hinge. A diagonal cross brace was then added. When you build your wooden gate s be sure you make your double gates about 1 in.